MacMan's version of Koen2X's EFI Mounter v2. Modified to use the diskutil command and supports running on systems with up to 10 disks attached. Updated to 64-bit. Completing the form will take you to a page where you can download Fiery Command WorkStation 6.5, 6.4, 6.2, or 5.8 packages, plus find out more compatibility information. I f you are a user of a high-speed inkjet printer do not proceed with this download. Contact your printer manufacturer for information on how to upgrade your version of Fiery.
It may be the result of an unsuccessful attempt to install Windows via Boot Camp or of simply not paying attention during the installation process, but a Mac’s Extensible Firmware Interface partition can go belly up. While the reason for a broken EFI partition can vary, the symptoms don't and neither does the way to fix it. Read on if you have a broken EFI partition to find out how to fix it.
Symptoms of a Broken EFI Partition
As you may already know, the EFI System Partition or ESP is a special partition on a Mac from which the initial system boot-time device drivers can be loaded and that was created as a BIOS replacement. This means that if there are issues with the EFI partition, then problems arise.
Download CleanMyMac X from MacPaw’s website and clean up to 500MB of junk data from your computer while enjoying all the features of the software without major limitations.
Efi Mounter Pc
That means computer startup issues, so be prepared as this could be one of the reasons for your Mac refusing to boot. In some cases, the Mac won't show any signs of trouble until you want to install a new version of macOS, and when that moment comes the attempt to upgrade will be unsuccessful with various errors to deal with.
How to Address the Broken EFI Partition Issue
MultiBeast for Mac 11.3.0, MultiBeast, the ultimate post-installation utility, has been updated to version 11.3.0 for macOS Mojave 10.14.5+. Free and streamlined utility designed from the ground up to make it as easy to choose the boot device on a hackintosh and install audio, grap. Using an EFI mounter like 'Clover configurator' mount OS X 'EFI' partition. Follow next 2 steps as specified. Open the mounted 'EFI' drive/folder on the OS X desktop then simply drag the attached entire 'Microsoft' folder inside that 'EFI' folder. Don't mess with any contents within 'Microsoft' folder. It is configured to boot Windows 10.
First things first, use Disk Utility to verify and repair the drive. To do that, simply select the internal drive listed in the utility and run First Aid. By doing so you'll let Apple's built-in disk management utility fix the problem. If the exit code is zero, then everything is back to normal and the issue is resolved. However, if the repair is unsuccessful, don't attempt to erase the partition or the whole drive with Disk Utility, nor should you rename the broken EFI partition because you'll likely run into further issues.
To fix the problematic EFI partition you have two options, either reinstall macOS or use Terminal to run a series of commands.
While not too elegant or tricky, the easiest way to fix a broken EFI is simply to reinstall macOS. This is possible in two ways, either through macOS Recovery or – if the Mac won't boot at all – macOS Internet Recovery. It goes without saying that you should back up your Mac (if you can) before the process.
To reinstall macOS with Recovery mode, you'll only need to follow these steps:
- Reboot your Mac and then press and hold the Command + R keys immediately until the Apple logo appears.
- Choose “Reinstall macOS” from the macOS Utilities screen.
- Select the target drive, and then just let macOS do its job.
By selecting this option, macOS will reinstall a new copy of the operating system without messing up any of your existing data. If anything does go wrong, you will still have an up-to-date Time Machine backup.
The macOS reinstall via Internet Recovery is useful if your Mac doesn't boot at all, you just need a fast and reliable internet connection.
Perform Terminal Commands (Only on HFS+ Formatted Drives)
This is more complicated and requires more technical confidence, as well as knowledge of the macOS system. The very first step in getting the EFI partition back is to check the volumes that macOS is able to see by running this command in Terminal:
Also, check whether there are any encrypted disks by running the following command:
diskutil cs list
As you can see from the screenshot below, the EFI partition file system is correctly classified as EFI type; errors occur when this EFI partition – for whatever reason – receives a new file system and is classified as something else, as was the case when a user reported to the Apple community that their EFI partition was incorrectly classified as HFS+.
With the details of the available volumes and encrypted disks to hand, proceed with the following steps:
- Download GPT Fdisk.
- Disable SIP.
- Boot normally, and run the following command:
t(to change the partition type)
1(for GUID Partition Table 1)
EF00(to EFI partition)
y(to confirm write).
sudo gdisk /dev/disk0
From here you'll enter gdisk interactive mode, where commands are single characters followed by return. Run commands in the following order:
After this process, reboot the system and then enter the following command:
diskutil repairDisk disk0
Efi Mounter For Mac Download Mac
Unfortunately, the gdisk command is no longer available on macOS High Sierra, so this trick only works on systems prior to APFS. Have you managed to fix the broken EFI partition using another method? If so, share it with us in the comments section.
Best Mac Optimization Software of 2021
Get the Best Deals on Mac Optimization Software
Efi Mounter V3.1
Stay up to date on the latest tech news and discounts on Mac optimization software with our monthly newsletter.